Parking Space Split Indicator Light TD-PB-405
Product Introduction
The split indicator light is installed directly above the front of each parking line to collect parking space status data in real time, and the parking space indicator light is controlled to display red, green or blue according to the full and empty state of the parking space.
Product Installation
The hole size of the split indicator base is recommended to be 25-35 through the wire hole, and the base can be fixed by fixing 2M4 * 16 screws. 32cm
Use and Maintenance
Non-system maintenance personnel shall not operate system equipment at will to prevent mis-operation and system failure.
Do not power on under high voltage to avoid overloading the indicator light
When replacing the faulty equipment, please disconnect the power of the equipment before operation to prevent the equipment from burning during operation.
When the system cannot work normally, please check the power supply of each equipment first to see if it has been turned off by mistake.
Product warranty period of 2 years.
Hardware Parameters
Product model: |
TD-PB-405 |
Working voltage: |
DC5V |
Communication mode: |
RS485 @ 9600bps |
Power consumption: |
1W |
Operating temperature: |
-40 ~ +65 ℃ |
Net weight: |
115g |
Installation height: |
No fixed limit |
Housing material: |
Grey ABS engineering plastic |
Wire Configuration |
PH2.0 3 m 4P cable |
Size: |
Φ111mm * 49mm |
TD-PB-405 Parking Space Split Indicator Light Specification
Get in touch or visit us
-
roger@tdzntech.com, +0 123 4567 8999
For inquiries about our products or pricelist, please leave your email to us and we will be in touch within 24 hours.