Wireless Ultrasonic Parking Space Detector TD-PB-402
Product Installation
The ground-mounted ultrasonic parking space detector is installed and fixed in the middle of the iron plate of each parking space. Firstly, the mounting base is glued on the iron plate of the parking space with super glue, and then the detector is fixed on the mounting base with M4 * 10 screws. The installation position of the detector is shown as below picture.
Use and maintenance
Non-system maintenance personnel shall not operate system equipment at will to prevent mis- operation and system failure.
After the system configuration file is completed, please make a backup to prevent it from being damaged and cannot be restored, reducing the maintenance workload
When replacing the faulty equipment, please disconnect the power of the equipment before operation to prevent the equipment from burning during operation.
When the system cannot work normally, please check the power supply of each equipment first to see if it has been turned off by mistake.
Product Features
Beautiful and generous shape, strong sense of science and technology, improve the image of the parking lot.
The detector adopts two independent transceiver circuit design and advanced parking space detection anti-interference algorithm, so that the detection accuracy can reach more than 99% .
The parking space detector adopts wireless communication, which effectively solves the problems of construction wiring, installation and maintenance inconvenience of mechanical stereo garage, and saves construction cost and cycle.
The detector adopts ultra-low power consumption design, built-in large-capacity battery, no external power supply, and the built-in battery can guarantee the equipment to work for more than 5 years.
Wireless parking detector with waterproof and thickening design, convenient parking lot washing, to prevent human trampling and other damage.
Hardware Parameters
Product model: |
TD-PB-402 |
Working voltage: |
2.6~3.3V (built-in battery) |
Size: |
Φ145*45mm |
Battery capacity: |
19000 mAh |
Net weight |
215g |
Average current: |
<300ua |
Protection level |
IP66 |
Battery life: |
More than 5 years |
Installation location: |
Parking space iron plate is in the center |
Communication mode: |
LORA |
Housing material: |
dark gray ABS engineering plastics |
Communication distance: |
≤ 30m |
Operating temperature: |
-20 ~ +65 ℃ |
detection accuracy |
> 99% |
TD-PB-402 Wireless Ultrasonic Parking Space Detector Specification
Get in touch or visit us
-
roger@tdzntech.com, +0 123 4567 8999
For inquiries about our products or pricelist, please leave your email to us and we will be in touch within 24 hours.